| 尼龙粉在汽车传动轴/转向轴的应用 |
| 添加时间：2018/1/18 18:07:09 浏览次数： |
| 尼龙粉在传动轴/转向轴应用已经几十年，成功的解决了汽车传动轴/转向轴在负载情况下的磨损、噪音问题。尼龙涂层有如下优点： Nylon powder on the drive shaft / steering shaft application has been for decades, the successful solution of the automobile drive shaft / steering shaft under load wear and noise problems. Nylon coating has the following advantages: -在负载情况下具有良好的蠕变性能 - has good creep resistance under load -耐磨性 - wear resistance -好的密封性能 Good sealing performance -永久的润滑性能 - permanent lubrication -好的热稳定性能 - good thermal stability -容易涂装和后加工 - easy painting and post processing 尼龙粉末涂装工艺推荐 Recommended nylon powder coating process 1.碱冼或其他清洗油脂，喷砂 1. alkali Xian or other cleaning oil, sand blasting 2.浸涂底漆 7P-0200 底漆成膜厚度 10<<20µm 2. 7P-0200 primer primer coating film thickness of 10<<20 M 3.涂装过程：流化床浸涂 3.: fluidized bed dipping coating process 预热：25 分钟 ，320°C（取决于工件尺寸） Preheat: 25 minutes, 320 degrees C (depending on the size of the workpiece) 粉末浸涂：浸入 2 次，浸入时间 3-8 秒，中间间隔 5 秒 Powder coating: in 2 times, in 3-8 seconds, an interval of 5 seconds 4.冷却：自然冷却 4. cooling: natural cooling 涂层厚度：300<<600µm Coating thickness: 300<<600 M 5.拉削：最终涂层厚度 200 µm mini ，250 µm maxi 5. broaching: final coating thickness 200 m mini, m Maxi 250 专用粉末型号：Vestosint 1111 NAT 本色/Vestosint 1111 Color蓝色 Special powder type: Vestosint 1111 NAT /Vestosint 1111 Color blue color 专用底漆型号：7P-0200液体 Special type: 7P-0200 liquid primer 在负载情况下，良好的耐蠕变性能-耐磨性-终身润滑的密封性能-耐热性-易于涂覆和机加工。 Under load, good creep resistance and abrasion resistance - lubricant sealing performance - heat resistance and easy coating and machining. |
| 上一页 对于汽车孔类转向节加工时需要通过夹持机构进行固定 |
| 下一页 碳纤维汽车传动轴的产业化 |
Copyright © 技术支持：遨游网络