尼龙粉在传动轴/转向轴应用已经几十年，成功的解决了汽车传动轴/转向轴在负载情况下的磨损、噪音问题。尼龙涂层有如下优点：
Nylon powder on the drive shaft / steering shaft application has been for decades, the successful solution of the automobile drive shaft / steering shaft under load wear and noise problems. Nylon coating has the following advantages:
-在负载情况下具有良好的蠕变性能
- has good creep resistance under load
-耐磨性
- wear resistance
-好的密封性能
Good sealing performance
-永久的润滑性能
- permanent lubrication
-好的热稳定性能
- good thermal stability
-容易涂装和后加工
- easy painting and post processing
尼龙粉末涂装工艺推荐
Recommended nylon powder coating process
1.碱冼或其他清洗油脂，喷砂
1. alkali Xian or other cleaning oil, sand blasting
2.浸涂底漆 7P-0200    底漆成膜厚度 10<<20µm
2. 7P-0200 primer primer coating film thickness of 10<<20 M
3.涂装过程：流化床浸涂
3.: fluidized bed dipping coating process
预热：25 分钟 ，320°C（取决于工件尺寸）
Preheat: 25 minutes, 320 degrees C (depending on the size of the workpiece)
粉末浸涂：浸入 2 次，浸入时间 3-8 秒，中间间隔 5 秒
Powder coating: in 2 times, in 3-8 seconds, an interval of 5 seconds
4.冷却：自然冷却
4. cooling: natural cooling
涂层厚度：300<<600µm
Coating thickness: 300<<600 M
5.拉削：最终涂层厚度 200 µm mini ，250 µm maxi
5. broaching: final coating thickness 200 m mini, m Maxi 250
专用粉末型号：Vestosint 1111 NAT 本色/Vestosint 1111 Color蓝色
Special powder type: Vestosint 1111 NAT /Vestosint 1111 Color blue color
专用底漆型号：7P-0200液体
Special type: 7P-0200 liquid primer
在负载情况下，良好的耐蠕变性能-耐磨性-终身润滑的密封性能-耐热性-易于涂覆和机加工。
Under load, good creep resistance and abrasion resistance - lubricant sealing performance - heat resistance and easy coating and machining.